It was understood, as indicated by testimony before the Board, that CEI would provide supervision on any shifts when non-routine work was carried out. In his absence, either the Operations Supervisor or the Test Supervisor was assigned as the Project Manager. In recent months, the Project Manager spent approximately half time at the site and half time at the contractor's office in Connecticut. The Contractor provided at the site a Project Manager, Operations Supervisor, a Test Supervisor, and a technical staff of approximately six personnel. ĬEI was responsible for the actual operation of the SL-1 reactor, for the routine training of military personnel and for developmental research programs. The plant was turned over to the Army for training and operating experience in December 1958 after extensive testing, with Combustion Engineering Incorporated (CEI) acting as the lead contractor beginning February 5, 1959. The circulating water system operated at 300 pounds per square inch (2,100 kPa) flowing through fuel plates of uranium-aluminum alloy. ANL used its experience from the BORAX experiments to design the reactor. It operated with natural circulation, using light water as a coolant (vs. The 3 MW (thermal) boiling water reactor (BWR) used 93.20% highly enriched uranium fuel. It went critical on August 11, 1958, became operational on October 24, and was formally dedicated on December 2, 1958. The prototype was constructed at the National Reactor Testing Station west of Idaho Falls from July 1957 to July 1958.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |